Customer Reviews for TempZone Cable Kit 432 ft (144 sqft @ 4 in spacing) with nTrust 2.0 Touch Nonprogrammable Thermostat, 120V, 3.7/ft, 13.48A


314 Reviews
Everything is working fine!

Everything is working fine!

Item Reviewed:
Steve B. | Las Vegas, NV
March 29, 2012

Share this Review
Awesome ! Thanks for taking care of me. Your service as

Awesome ! Thanks for taking care of me. Your service as usual was incredible. great product. Don Ballard

Item Reviewed:
Ballard E. | Newbury Park, CA
March 16, 2012

Share this Review
Your service as usual was incredible.

Awesome! Thanks for taking care of me. Your service as usual was incredible. Great product.

Item Reviewed:
Ballard E. | Newbury Park, CA
March 16, 2012

Share this Review
We have used this product several times, but...

We have used this product several times, but this circuit checker seemed to have internal issues as it had been dropped. All was well, but by turning it around - or over - the alarm would go off. We checked all wiring and resistance, and all was well, BUT it gave false readings from something loose on inside.

Item Reviewed:
Thaddeus V. | Lansing, MI
March 07, 2012

Share this Review
Nice peace of mind

The circuit check made it very easy to monitor whether the heating element was damaged during installation. Nice peace of mind.

Item Reviewed:
William S. | Los Alamos, NM
February 09, 2012

Share this Review
Wouldn't buy this again as a good digital multimeter...

Wouldn't buy this again as a good digital multimeter will accomplish the same thing if you have one. Simply check all resistances with regularity as you proceed with the installation.

Item Reviewed:
David J. | Bayfield, WI
January 13, 2012

Share this Review
Seems to work great

seems to work great.

Item Reviewed:
Mark P. | Wellesley, MA
December 14, 2011

Share this Review
I didn't find this necessary

I didn't find this necessary if you have a multi-meter available.

Item Reviewed:
Jason | Scotia , NY
October 15, 2011

Share this Review
The unit is simple and effective.

The unit is simple and effective.

Item Reviewed:
Joe G. | Artesia, NM
October 03, 2011

Share this Review
Great product

The circuit check eased our minds during installation. Great product.

Item Reviewed:
Diane D. | Hamilton, NJ
October 02, 2011

Share this Review
Thank goodness for this checker. My tile installer opened the

Thank goodness for this checker. My tile installer opened the wire and stopped got me and I found the open repaired and he got back to work quickly.

Item Reviewed:
Mike S. | Baltimore, MD
September 10, 2011

Share this Review
Easy to use.

Easy to use.

Item Reviewed:
Robert L. | PALMDALE, CA
September 07, 2011

Share this Review
Great time saver

This was a great time saver. You just hooked it up and started to lay the heater element and then lay the tile. There was no going back and forth to check to see if you had an opening.

Item Reviewed:
James L. | Virginia Beach, VA
April 13, 2011

Share this Review
The circuit check devices are inferior quality.

The circuit check devices are inferior quality. I can't remember the last time I used one that did not create aggravation. As simple as they are if they fall apart or require repairs...It's aggravating. This opinion is coming from 3 different installers. This is the weakest link with the entire installation.

Response from WarmlyYours:

Thank you for the input John. I have asked our Engineering Supervisor - Scott - to contact you to understand the "break down". We appreciate your help in making us better! - Julia Billen, President

Item Reviewed:
John G. | BALDWIN, NY
January 22, 2011

Share this Review
Easy to install and use.

Easy to install and use. Does everything you could possibly need it to do.

Item Reviewed:
Valerie B. | Pittsgrove, NJ
January 20, 2011

Share this Review
Confidence to proceed

So much can go wrong during the install and my install was very drawn out with times when the heating circuits were exposed and in peril of being damaged. The circuit checkers allowed us the confidence to proceed with a project confidently with 1000s of dollars of tile and finish work to be performed after the heating element install, before the system could be given the ultimate installed test. Nice touch and I could not imagine the anguish that these devices could save a contractor or homeowner. Thankfully we enjoyed a textbook install but knowing of the existence of a problem the instant it occurs is a priceless feature.

Item Reviewed:
Fred D. | Macon, GA
December 18, 2010

Share this Review
Make Great Toys for Grandkids!

Like the noise these things make, like a Star Trek weapon. Seems a shame that they are only useful for a few seconds while checking the mat. I've collected quite a few from multiple installations and give them to my grandkids to play with.

Item Reviewed:
Brian F. | SAN BRUNO, CA
December 16, 2010

Share this Review
It was nice to have

It was nice to have a cirduit check that would alert you if something went wrong. it never did go off and when an ohms check was made it checked the value was only about two tenths differen than what it was supposed to be.

Item Reviewed:
Warner L. | Birmingham, AL
June 28, 2010

Share this Review
Works perfectly

Works perfectly

Item Reviewed:
Cain P. | Toronto, Ontario
May 19, 2010

Share this Review
great product

great product, tells you very quickly if something has gone wrong

Item Reviewed:
Jeffery T. | PITTSBURGH, PA
April 26, 2010

Share this Review
Good tool but used ohm meter

A good tool, but I relied more on my ohm meter

Item Reviewed:
Alan J. | Victoria, BC
April 22, 2010

Share this Review
A little unsure

This was the only thing that made me a little unsure if all was well. I did my ohm readings and hooked up the circuit check, but because they seem so flimsy and me being new to the WarmlyYours I had to just trust that all was well. I did disconnect to hear the sound, but somehow it would be nice to have a more robust unit that I could purchase at the beginning of my installation projects (one time)that would put my unease to rest.

Item Reviewed:
James M. | Thunder Bay, Ontario
April 15, 2010

Share this Review
Circuit check

I use the circuit check, but I also check frequently with a multimeter. My hearing is not that great, so I don't always hear it. A flashing light would be nice.

Item Reviewed:
Bill T. | NAZARETH, PA
April 14, 2010

Share this Review
A litte hard to figure out but works great

I had a little difficulty using it, but once I figured it out. It was a great tool to make sure my installation was fully functional before I set the tile....Great Product

Item Reviewed:
Shawn R. | Munster, IN
April 14, 2010

Share this Review
gives us piece of mind. great idea.

gives us piece of mind. great idea.

Item Reviewed:
Andy H. | CAMPOBELLO, SC
April 14, 2010

Share this Review