Maple 8 Towel Warmer, Matte Black, Hardwired, 8 Bars
Features
-
Generous 8-Bar Design: The Maple towel warmer uses 8 flat, stainless steel bars to evenly distribute heat, warming up to 2 large towels or bathrobes
-
Attractive Matte Black Finish: This finish creates a bold visual impression
-
Hardwired: Wall-mounted with cord-free design, the Maple hangs beautifully in any bathroom and is hardwired for 120 volts
-
TempSmart Overheat Protection: This model comes with built-in TempSmart™ overheat protection to prevent the unit’s surface temperature from exceeding 149°F (65°C)
-
5-Year Warranty: The Maple is covered by our manufacturer’s warranty for peace of mind
Description
The Maple towel warmer from WarmlyYours is a compact model that provides an enormous amount of functionality. The 8 flat, heated bars of this wall-mounted model help the Maple put out an impressive 358 BTUs per hour. Compared to traditional heated towel rack bars that are square or round in cross-section, the flat bars of the Maple provide more surface area contact for expedient heating of your towels and bathrobes. The design also incorporates a spacing that allows the top pair of bars to perfectly accommodate hand towels. The hardwired connection (120 VAC) ensures a streamlined appearance once installed. This version of the Maple comes with a visually striking matte black finish and durable steel construction. This model comes with built-in TempSmart™ protection to prevent the unit from overheating.
Features:
- Dimensions: 20.4” (518 mm) W x 27.5” (699 mm) H x 4.3” (109 mm) D
- 105 watts, heat output of 358 BTUs per hour
- 8 heated, flat bars
- Matte black finish, durable steel construction
- Hardwired connection (120 VAC) eliminates visible wires
- Heat Up Time: 15 – 20 minutes to reach max surface temperature
- Integrated power switch with indicator light
- Safe: cULus Listed with built-in overheat protection
- Warranty: 5 years
- Lifetime technical support from WarmlyYours
Specifications
Electrical
Amps | 0.88 A |
Connection Method | Hardwired |
Ingress Protection (IPxx) Rating | IP55 |
Ohms | 137.14 Ω |
On/Off Switch | Yes |
Thermal Power | 0.11 kW |
Voltage | 120 V |
Watts | 105 W |
Warranty / Certifications
Approvals | cULus listed |
Proposition 65 Compliant | Yes |
Warranty | 5-year limited warranty |
Performance
Average Surface Temperature | 122°F / 50°C |
BTU Per Hour | 358 Btu |
Heat-up Time | 15-20 minutes |
TempSmart Safety Limit | 149°F - 167°F / 65°C - 75°C |
Towel Capacity | 1-2 |
Appearance
Bar Arrangement | 4 groups of 2 |
Bar Shape | Flat |
Finish | Black |
Finish Application | Powder Coating |
Mounting Method | Wall Mounted |
Steel Type | 201-stainless steel |
Style | Modern |
Towel Bars | 8-bars |
Logistics
Country of Origin (COO) | China |
Package Contents | Towel Warmer, installation manual and hardware kit |
Product Dimensions
Depth | 4.3″ |
Height | 27.5″ |
Mounting Footprint | 18 ⅞“ (479mm) W x 20 ⅜“ (518mm) H |
Weight | 13.2 lbs |
Width | 20.4″ |
Identifiers
SKU | TWS6-MPL08KH |
Towel Warmer Collection Name | Classic Collection |
UPC (GTIN-12) | 881308054991 |
Documents & Manuals
Installation
- Towel Warmer Hardwired Series TWS6 Grande, Maple, Milan Installation Manual (English)
- Towel Warmer Hardwired Series TWS6 Grande, Maple, Milan Installation Manual (French)
Warranties
Sell Sheets
Catalogs
Customer Questions & Answers
Maple has 32 Questions and Answers.
Can I install the towel warmer myself or do I need to hire someone to do it for me?
Each towel warmer comes with an instruction manual which fully explains how to install the device from start to finish. If you can hang a picture, you can probably install a heated towel rack. However, for hardwired models, you will need a licensed professional who is certified to do electrical wiring for the final hook-up.
Can the electric towel warmer be installed “upside down” to change the power access point?
Yes, most of our wall-mounted towel warmers have a fixed power location in the lower right corner. All of our heated towel racks are electric "dry" (liquid/oil-free) units and most can be installed "upside down". Doing so will result in the power location relocating from the lower right corner to the upper left corner.
Please see the installation video here: https://www.warmlyyours.com/en-US/video-media/towel-warmer-install
How do I use the towel warmer after it is installed?
Our towel warmers are designed for everyday use and all of them include an integrated on/off switch. Please note that the Ibiza model includes additional built-in timer options for controlling the unit. WarmlyYours also offers a wide array of controls that can be used with your heated towel rack. Depending on the control you select, you can program the heated towel rack to your schedule or operate it remotely. Just bear in mind that the heated towel rack is designed to gradually warm towels over the course of a day and does work best when towels are left to hang for about 3 hours.
How hot does the towel warmer actually get and is there any possibility of damage?
The heated towel rack will heat up to between 100 and 140 degrees Fahrenheit. It will not produce sufficient heat to injure you if you touch or brush up against it, though you should still exercise caution around the device. Please note that once a heated towel rail is warmed up, the surface temperature will remain constant and can't be adjusted incrementally.
The heated towel racks have a built-in offset from the wall (the size of the offset will depend on which model you purchased); the offset provides sufficient clearance to prevent any damage to the wall. You should also maintain a distance of four inches between the towel warmer and surrounding fixtures.
Additionally, nearly all of our electric towel warmer models* come with built-in TempSmart™ overheat protection which will shut the unit down automatically if the unit's surface exceeds the safety limit of between 149°F (65°C) and 167°F (75°C).
*Excludes the Elements model.
Does the towel warmer have an automatic shutoff function?
The heated towel rack is designed to stay on at a relatively constant temperature to keep your bathrobes and towels fresh, warm, and dry. However, should you need to turn the unit off for any reason, you can use the integrated on/off switch on the unit. If you’re using a control for your heated towel rack, you may need to shut off the unit there as well.
Most of our electric towel warmer models* come with built-in TempSmart™ overheat protection which will shut the unit down automatically if the unit's surface exceeds the safety limit of between 149°F (65°C) and 167°F (75°C).
*Excludes the Elements model.
View all 32 Questions and Answers
Customer Reviews
Maple achieved an average rating of 4.8 stars with 4 reviews by our customers.
Cozy towel warmer
Sunny R., Halifax, NS on 07/06/2023
We just finished our new on suite bathroom renovation and we had installed our towel warmer and we love it! The style is beautiful and fits perfectly. We couldn’t be happier with this product.
Have not installed yet as renos are not happening until Novem
Saveria M., Richmond Hill, ON on 06/23/2022
Have not installed yet as renos are not happening until November. Will submit a review then. Thanks
Easy ordering process, Quick delivery, Good IP rating
Norbert H., Stouffville, ON on 02/15/2021
The towel warmer seems to be well made. We had originally ordered a Metropolitan and only found out later that it had a low IP rating which made it unsafe to mount in the only space we had. It would also be useful to provide a template to ensure that mounting hardware is installed correctly.
Love it, works so well!
Ben S., Seattle, WA on 02/15/2021
After lots of looking, landed on this one and it's perfect. Looks great, easy to mount (mostly) and works very well. some tips: - watch hanging it so you're near the outlet but watch for the studs - when you get it, go to the web site for instructions - I HIGHLY recommend the wifi enabled one so you can easily set timers