24ʺ Brushed Towel Holder Bar for Ember Radiant Heating Panels (Excludes IP-EM-FLX-WHT-0300-CW)

There is no on/off button. If you're using your dual connection Ember radiant panel in the plug-in configuration, it can be unplugged when not in use or paired with compatible plug-in control devices like a timer. If you've elected to convert your dual connection radiant panel to a hardwired connection, the radiant panel should be wired to a hardwired control option like a switch, a hardwired timer, or a hardwired thermostat.

Need more help? View support options

We do not have a Radiant Panels Running Cost Calculator.  However, this can be determined easily by taking the panel’s wattage, dividing it by 1000, and then multiplying the result by the local kW/hr cost – then take this hourly cost and multiple by 730 hours to get a monthly estimate.

Need more help? View support options

Yes.

Need more help? View support options

No, the Ember radiant panels are not designed to be controlled with a dimmer.

Need more help? View support options

Yes.

Need more help? View support options

No, the back of the panel has only two pre-drilled locations. One at the upper half of the unit and one at the lower half.

Need more help? View support options

The bar simply being screwed-in to the pre-drilled holes on the back of the panel.

Need more help? View support options

Ember Radiant Panel is 24 inches in width and either 35 or 47 inches in length and the average bath towel is 20 -24 inches wide by 40 to 50 inches long. With these dimensions, one towel draped in half over the bar performs best. Two hand towels draped in half would work well too, as hand towels tend to be about 12-15 inches in width.

Need more help? View support options

One towel draped in half, or two hand towels draped in half.

Need more help? View support options

No, the bar is not heated.

Need more help? View support options