Snow Melt OmniMat 4" Spacing, 240V, 2′ x 30′, 60 sq. ft., 9.9A

Snow Melt OmniMat 4" Spacing, 240V, 2′ x 30′, 60 sq. ft., 9.9A
2 Reviews
Need help? Call our experts at 800-875-5285
Get an Instant Quote
Support Page

Features

  • Efficient Heat Output: This embeddable electric heating mat provides up to 38.5 watts per sq. ft.
  • Even Heating: Snow melting mats come with the heating elements pre-attached to a mesh in a serpentine pattern with consistent 4” spacing which ensures even heating
  • Embeddable in Concrete, Asphalt, or in Mortar Under Pavers: When you install a mat-based snow melting system within a new driveway, walkway, or patio, you can make sure your outdoor surface will be free of ice and snow all year
  • Fast and Easy Installation: Snow melting mats are faster and easier to install than snow melting cables but a bit more expensive
  • Installation Support: WarmlyYours offers free SmartPlan™ installation plans, 24/7 phone support, and a 10-year limited warranty

Snow Melt Mats Description

WarmlyYours snows melting mats safely and efficiently melt snow and ice from walkways, patios, and driveways. These 2 x 30 ft. 240 V snow melting mats provide 60 ft² of coverage. They feature a durable heating element affixed in a serpentine pattern to a polypropylene mesh backing, allowing for easy installation and even distribution of heat in asphalt, concrete or (mortar underneath) paver surfaces. 

This Snow Melting Mat has 4 inch spacing between runs of the heating cable for energy efficient and dependable snow melting performance. The corrosion-resistant, twin-conductor heating element generates up to 38.5 watts per square foot. A 20-foot (6m) cold lead is included.

WarmlyYours snow melting mats are CSA certified for outdoor use in Canada and the U.S.

Specifications

Electrical

Amps 9.85 A
Ohms 24.36 Ω
Voltage 240 V
Watts 2365 W
Watts Per Sq. Ft. 39.42

Warranty / Certifications

Approvals cCSAus Listed
Warranty 10 years

Performance

BTU Per Hour 8070 Btu
Heated Coverage 67.5 ft²

Product Dimensions

Cold Lead Length 20′
Coverage 60 ft²
Heating Element Spacing 4″
Heating Element Thickness 5/16″
Length 30′
Size 2′ x 30′
Size and Power 2x30 ft - 39 W/sq.ft.
Weight 11.4 lbs
Width 24″

Appearance

Color Green

Logistics

Country of Origin (COO) India

Identifiers

SKU WHMA-240-0230-4
UPC (GTIN-12) 881308074296

Installation

Surface Types Asphalt, concrete or in mortar under pavers

Customer Questions & Answers

Snow Melt Mats has 45 Questions and Answers.

Don't see the answer you're looking for? Post your question
How quickly do these systems melt the snow?

That depends on a number of variables (like the temperature outside) but generally speaking these snow melting systems are designed to melt 1" - 3" of snow per hour. Anything above 3" per hour is typically considered blizzard conditions. 
22 people found this helpful.  Did you find this helpful? Yes No
Is it okay to cut the snow melting cable if it is too long for the application for which it was designed?

Never cut the heating cable. A heating cable will not work if it has been cut. If the heating cable is too long, call WarmlyYours to consult with a technician who will guide you in utilizing the additional length of cable.
17 people found this helpful.  Did you find this helpful? Yes No
How does the electric snow melting system compare to hot water tubing (hydronic) systems?

The material costs are similar. However, electric systems are easier to install, with fewer components and significantly lower maintenance costs. Electric systems will run for a shorter period of time to give the same level of performance but with much higher energy efficiency (typically 95%-98% efficient). Controls and sensors required for the two types of systems are very similar. Electric systems do not usually require slab insulation and do not create the concerns typically associated with hydronic systems. These concerns include, but are not limited to, return temperatures, flue gas venting, waterway shrinkage and property damage caused by leaking pipes or tubes.
14 people found this helpful.  Did you find this helpful? Yes No
May I cross or overlap the WarmlyYours snow melt heating cable?

When installing outdoor WarmlyYours snow melting cables for your driveway, patio, walkway, terrace, stairs, ramp, etc. - NEVER cross, overlap, or allow the heating cables to touch each other. Doing so will quickly cause a circuit failure due to excessive heat build up. Always follow the installation instructions and/or design layout plan to ensure the cable is installed with the correct spacing required for proper operation.
13 people found this helpful.  Did you find this helpful? Yes No
Does the factory splice need to be completely embedded during installation?

Yes. The manufacturer's splice that connects the heating element to the cold lead should be entirely embedded in a noncombustible material (like asphalt, concrete, or mortar) within the outdoor surface that is being heated. 
12 people found this helpful.  Did you find this helpful? Yes No
View all 45 Questions and Answers

Customer Reviews

Snow Melt Mats achieved an average rating of 5.0 stars with 2 reviews by our customers.

Have you used this product before? Leave a review

Great services

Frederic J., Gaspe, QC on 10/04/2024

Very Good Communication, Quick Delivery, Great Product, excellent communication.Will do business again.

Wonderful as usually

Jasmine U., Oak Grove, MO on 06/04/2023

Pedro and the tech team were wonderful as usual

View all customer reviews