Snow Melt Mat 240V, 2 x 10 ft., 20 sq.ft., 4.17A
Size And Power
Features
-
High Heat Output: This embeddable electric heating mat provides nearly 50-watts per sq. ft
-
Embeddable in Concrete, Asphalt, or in Mortar Under Pavers: When you install a mat-based snow melting system within a new driveway, walkway, or patio, you can make sure your outdoor surface will be free of ice and snow all year
-
Even Heating: Snow melting mats come with the heating elements pre-attached to a green mesh in a serpentine pattern with consistent 3” spacing which ensures even heating
-
Fast and Easy Installation: Snow melting mats are faster and easier to install than snow melting cables but a bit more expensive
-
Installation Support: WarmlyYours offers free SmartPlan™ installation plans, 24/7 phone support, and a 10-year limited warranty
Snow Melt Mats Description
Ideal for smaller commercial or residential applications, the WarmlyYours 2 x 10 ft. 240 V snow melting mats provide 20 ft² of radiant warmth at 50 watts per square foot to eliminate snow and ice from asphalt, concrete or (mortar underneath) paver surfaces. Affixed to a lightweight, mesh backing, the durable, twin-conductor heating cable resists corrosion and is CSA certified for outdoor use in Canada and the U.S. These cut-and-turn mats are easy to install and include a 20-foot (6m) cold lead.
Learn more about snow melting systems. Perfect for heated driveways, patios, walkways and paths, accessibility ramps, or even stairs.
Specifications
Electrical
Amps | 4.17 A |
Ohms | 57.6 Ω |
Voltage | 240 V |
Watts | 1000 W |
Watts Per Sq. Ft. | 50 |
Watts Per Sq. Ft. at 3 Inch Spacing | Up to 50 |
Warranty / Certifications
Approvals | cCSAus Listed |
Warranty | 10 years |
Performance
BTU Per Hour | 3412 Btu |
Heated Coverage | 22.5 ft² |
Product Dimensions
Cold Lead Length | 20′ |
Coverage | 20 ft² |
Heating Element Spacing | 3″ |
Heating Element Thickness | 5/16″ |
Length | 10′ |
Size | 2′ x 10′ |
Size and Power | 2x10 ft - 50 W/sq.ft. |
Weight | 5.8 lbs |
Width | 2′ |
Appearance
Color | Green |
Logistics
Country of Origin (COO) | India |
Identifiers
SKU | WHMA-240-0210 |
UPC (GTIN-12) | 881308011161 |
Installation
Surface Types | Asphalt, concrete or in mortar under pavers |
Installation Plans
This is a real example of an installation plan that uses this product. If you want to design your own room or have any questions, please contact us.
Concrete (new) Subfloor
N/A Voltage
240V Operating Cost
420 cents per hour
This Installation Plan Includes:
Documents & Manuals
Installation
- Snow Melting Installation Manual (English)
- Manual de Instalación para Sistemas de Derretimiento de Nieve (Spanish)
- Snow Melting & Slab Heating Application Cross Sections (Spanish)
- Snow Melting & Slab Heating Application Cross Sections (English)
- Snow Melting & Slab Heating Application Cross Sections (French)
- Snow Melting Installation Manual (French)
Project Planners
Warranties
Sell Sheets
Catalogs
Customer Questions & Answers
Snow Melt Mats has 45 Questions and Answers.
How quickly do these systems melt the snow?
That depends on a number of variables (like the temperature outside) but generally speaking these snow melting systems are designed to melt 1" - 3" of snow per hour. Anything above 3" per hour is typically considered blizzard conditions.
Is it okay to cut the snow melting cable if it is too long for the application for which it was designed?
Never cut the heating cable. A heating cable will not work if it has been cut. If the heating cable is too long, call WarmlyYours to consult with a technician who will guide you in utilizing the additional length of cable.
How does the electric snow melting system compare to hot water tubing (hydronic) systems?
The material costs are similar. However, electric systems are easier to install, with fewer components and significantly lower maintenance costs. Electric systems will run for a shorter period of time to give the same level of performance but with much higher energy efficiency (typically 95%-98% efficient). Controls and sensors required for the two types of systems are very similar. Electric systems do not usually require slab insulation and do not create the concerns typically associated with hydronic systems. These concerns include, but are not limited to, return temperatures, flue gas venting, waterway shrinkage and property damage caused by leaking pipes or tubes.
May I cross or overlap the WarmlyYours snow melt heating cable?
When installing outdoor WarmlyYours snow melting cables for your driveway, patio, walkway, terrace, stairs, ramp, etc. - NEVER cross, overlap, or allow the heating cables to touch each other. Doing so will quickly cause a circuit failure due to excessive heat build up. Always follow the installation instructions and/or design layout plan to ensure the cable is installed with the correct spacing required for proper operation.
Does the factory splice need to be completely embedded during installation?
Yes. The manufacturer's splice that connects the heating element to the cold lead should be entirely embedded in a noncombustible material (like asphalt, concrete, or mortar) within the outdoor surface that is being heated.
View all 45 Questions and Answers
Customer Reviews
Snow Melt Mats achieved an average rating of 4.9 stars with 30 reviews by our customers.
Great services
Frederic J., Gaspe, QC on 10/04/2024
Very Good Communication, Quick Delivery, Great Product, excellent communication.Will do business again.
Excellent company to work with.
Don W., Chester, CA on 06/25/2024
Purchased a snow melting mat that was installed in concrete. Haven't had any snow yet to try it out but it should definitely help in the winter. Laurie at WarmlyYours was excellent to work with and responded very quickly to my questions. Thanks so much!
Very professional
Llc G., White Plains, NY on 04/19/2024
I needed this product asap.. They were on time and readily available for any questions!
Good choice
Mike M., Lakewood, CO on 12/11/2023
The WarmlyYours ice melt I recently installed is working great. They clearly have a 5 star product. I have only two slight complaints: none of the contractors referred by WY ever bothered to call back, so I had to find electrician and concrete guy myself. The plastic cover on the Snow Switch should be hinged instead of fastened with screws.
Excellent support, product, documentation, and stock
Mitchell S., Richmond Hill, ON on 11/15/2023
I had many questions, both while planning, and just before installation. WarmlyYours was great and answers, their on-line documentation is detailed and helpful, and everything was in-stock for pick-up. Looking forward to the snow.
Great experience
Bill, Hawthorne, NY on 10/30/2023
From customer service to product quality, it was nice to have a company in your corner to help tackle a project.
Wonderful as usually
Jasmine U., Oak Grove, MO on 06/04/2023
Pedro and the tech team were wonderful as usual
Great Customer Service for an Excellent Product
Richard K., Lakewood, NJ on 03/17/2023
Our experience with WarmlyYours was great from the beginning. They were easy to work with and provided a custom plan and all the necessary hardware to accomplish the job. We changed the design in the process and we were helped every step of the way. The system was on just this week and everything functioned accordingly.
Must have this if you live in a snowy region
Anonymous, Colorado Springs, CO on 01/03/2023
Works great! No more salt or shoveling!
Mary knows her stuff. If she doesn't know , she calls you bac
Ken S., Commerce Township, MI on 09/28/2022
Mary knows her stuff. If she doesn't know , she calls you back within minutes with an answer.