Vida Towel Warmer, Polished, Hardwired, 21 Bars


Vida Towel Warmer, Polished, Hardwired, 21 Bars

Oversized Shipping

Features

  • Generous 21-Bar Design: The Vida towel warmer uses 21 polished stainless steel bars to evenly distribute heat, warming up to 3 large towels or bathrobes

  • Hardwired: Wall-mounted with cord-free design, the Vida hangs beautifully in any bathroom and is hardwired for 120 volts

  • TempSmart Overheat Protection: This model comes with built-in TempSmart™ overheat protection to prevent the unit’s surface temperature from exceeding 149°F (65°C)

  • Easy To Clean: The Vida is made with a durable, low-maintenance stainless steel construction

  • 5-Year Warranty: The Vida is covered by our manufacturer’s warranty for peace of mind

Vida Description

A towel warmer is more than a simple appliance—it’s a gateway to a level of comfort previously only available in expensive spas. The Vida electric towel warmer from WarmlyYours is a large luxuriant model with 21 heated bars spaced out in groups of 4, 7, and 10. The large number of bars and their orientation ensures you’ll be able to warm and dry a wide range of towels, bathrobes, and more. The Vida also boasts an impressive heat output rate of 716 BTUs per hour. The polished 304 stainless steel finish and curved design allows the Vida to fit organically into any aesthetic. This model comes with built-in TempSmart™ overheat protection to prevent the unit’s surface temperature from exceeding 149 °F (65°C).

Features:

  • Dimensions: 23.6” (599 mm) W x 59” (1,499 mm) H x 5.5” (140 mm) D
  • 21 heated bars
  • 210 watts with a heat output of 716 BTUs per hour
  • Polished finish with 304-stainless steel construction
  • Hardwired 120 VAC connection eliminates visible wires
  • Easy-to-use integrated power switch with indicator light
  • Safe: cULus Listed with built-in overheat protection 
  • Warranty: 5 years
  • Lifetime technical support from WarmlyYours  

Specifications

Electrical

Amps 1.75 A
Connection Method Hardwired
Ingress Protection (IPxx) Rating IP55
Ohms 68.57 Ί
On/Off Switch Yes
Thermal Power 0.21 kW
Voltage 120 V
Watts 210 W

Warranty / Certifications

Approvals cULus listed
Proposition 65 Compliant Yes
Warranty 5-year limited warranty

Performance

Average Surface Temperature 122°F / 50°C
BTU Per Hour 717 Btu
Heat-up Time 15-20 minutes
TempSmart Safety Limit 149°F - 167°F / 65°C - 75°C
Towel Capacity 1-3

Appearance

Bar Arrangement Groups of 4, 7, and 10
Bar Shape Round
Cord Color White
Finish Polished Stainless Steel
Mounting Method Wall Mounted
Steel Type 304-stainless steel
Style Classic
Towel Bars 21-bars

Logistics

Country of Origin (COO) China
Package Contents Towel Warmer, installation manual and hardware kit

Product Dimensions

Depth 5.5″
Height 59″
Mounting Footprint 22 ⅛“ (562mm) W x 52“ (1321mm) H
Weight 19.9 lbs
Width 23.6″

Identifiers

SKU TWS3-VID21PH-BTK
Towel Warmer Collection Name Classic Collection
UPC (GTIN-12) 881308069384

Customer Questions & Answers

Vida has 32 Questions and Answers.

Don't see the answer you're looking for? Post your question

Each towel warmer comes with an instruction manual which fully explains how to install the device from start to finish. If you can hang a picture, you can probably install a heated towel rack. However, for hardwired models, you will need a licensed professional who is certified to do electrical wiring for the final hook-up. 

19 people found this helpful.  Did you find this helpful? Yes No

Yes, most of our wall-mounted towel warmers have a fixed power location in the lower right corner.  All of our heated towel racks are electric "dry" (liquid/oil-free) units and most can be installed "upside down". Doing so will result in the power location relocating from the lower right corner to the upper left corner.

Please see the installation video here:  https://www.warmlyyours.com/en-US/video-media/towel-warmer-install

17 people found this helpful.  Did you find this helpful? Yes No

The heated towel rack will heat up to between 100 and 140 degrees Fahrenheit. It will not produce sufficient heat to injure you if you touch or brush up against it, though you should still exercise caution around the device. Please note that once a heated towel rail is warmed up, the surface temperature will remain constant and can't be adjusted incrementally. 

The heated towel racks have a built-in offset from the wall (the size of the offset will depend on which model you purchased); the offset provides sufficient clearance to prevent any damage to the wall. You should also maintain a distance of four inches between the towel warmer and surrounding fixtures.

Additionally, nearly all of our electric towel warmer models* come with built-in TempSmart™ overheat protection which will shut the unit down automatically if the unit's surface exceeds the safety limit of between 149°F (65°C) and 167°F (75°C).

*Excludes the Elements model.


16 people found this helpful.  Did you find this helpful? Yes No

Our towel warmers are designed for everyday use and all of them include an integrated on/off switch. Please note that the Ibiza model includes additional built-in timer options for controlling the unit. WarmlyYours also offers a wide array of controls that can be used with your heated towel rack. Depending on the control you select, you can program the heated towel rack to your schedule or operate it remotely. Just bear in mind that the heated towel rack is designed to gradually warm towels over the course of a day and does work best when towels are left to hang for about 3 hours.

15 people found this helpful.  Did you find this helpful? Yes No

The heated towel rack is designed to stay on at a relatively constant temperature to keep your bathrobes and towels fresh, warm, and dry. However, should you need to turn the unit off for any reason, you can use the integrated on/off switch on the unit. If you’re using a control for your heated towel rack, you may need to shut off the unit there as well. 

Most of our electric towel warmer models* come with built-in TempSmart™ overheat protection which will shut the unit down automatically if the unit's surface exceeds the safety limit of between 149°F (65°C) and 167°F (75°C). 

*Excludes the Elements model. 

13 people found this helpful.  Did you find this helpful? Yes No

View all 32 Questions and Answers