Bellagio Towel Warmer, Polished, Hardwired, 20 Bars


Bellagio Towel Warmer, Polished, Hardwired, 20 Bars




Support Page
Oversized Shipping

Features

  • Generous 20-Bar Design: The Bellagio towel warmer uses 20 polished stainless steel bars to evenly distribute heat, warming up to 3 large towels or bathrobes

  • Hardwired: Wall-mounted with cord-free design, the Bellagio hangs beautifully in any bathroom and is hardwired for 120 volts

  • TempSmart Overheat Protection: This model comes with built-in TempSmart™ overheat protection to prevent the unit’s surface temperature from exceeding 149°F (65°C)

  • Easy To Clean: The Bellagio is made with a durable, low-maintenance stainless steel construction

  • 5-Year Warranty: The Bellagio is covered by our manufacturer’s warranty for peace of mind

Description

The Bellagio towel warmer from WarmlyYours is an elegant and impressively designed model. With 20 heated, curved bars, it’s no surprise that the Bellagio boasts a high heat output of 648 BTUs per hour. The spacing and the number of bars also means this model will be able to warm and dry a large variety of different towel sizes. The Bellagio’s hardwired electrical connection (120 VAC) means there won’t be any visible wires or cords when it’s installed. The highly polished finish and 304-stainless steel construction of this version of the Bellagio is as durable as it is visually stunning. This model comes with built-in TempSmart™ overheat protection to prevent the unit’s surface temperature from exceeding 149°F (65°C).

Features:

  • Dimensions: 47.2” (1199 mm) H x 20” (508 mm) W x 4.3” (109 mm) D
  • 190 watts, heat output of 648 BTUs per hour
  • 20 heated curved bars
  • Polished finish, 304-stainless steel construction
  • Hardwired connection (120 VAC) eliminates visible wires
  • Heat Up Time: 15 – 20 minutes to reach max surface temperature
  • Integrated power switch with indicator light
  • Safe: cULus Listed with built-in overheat protection
  • Warranty: 5 years
  • Lifetime technical support from WarmlyYours

Specifications

Electrical

Amps 1.58 A
Connection Method Hardwired
Ingress Protection (IPxx) Rating IP55
Ohms 75.79 Ω
On/Off Switch Yes
Thermal Power 0.19 kW
Voltage 120 V
Watts 190 W

Warranty / Certifications

Approvals cULus listed
Proposition 65 Compliant Yes
Warranty 5-year limited warranty

Performance

Average Surface Temperature 122°F / 50°C
BTU Per Hour 648 Btu
Heat-up Time 15-20 minutes
TempSmart Safety Limit 149°F - 167°F / 65°C - 75°C
Towel Capacity 1-3

Appearance

Bar Arrangement Groups of 4, 4, 5, and 7 bars
Bar Shape Round
Bar Spacing 1.25″ and 3.25″
Finish Polished
Mounting Method Wall Mounted
Steel Type 304-stainless steel
Style Classic
Towel Bars 20-bars

Logistics

Country of Origin (COO) China
Package Contents Towel Warmer, installation manual and hardware kit

Product Dimensions

Depth 4.3″
Height 47.2″
Mounting Footprint 18 ¾“ (476mm) W x 40 ¼“ (1022mm) H
Weight 15.6 lbs
Width 1′ 8″

Identifiers

SKU TWS3-BLG20PH
Towel Warmer Collection Name Classic Collection
UPC (GTIN-12) 881308054939

Customer Questions & Answers

Bellagio has 32 Questions and Answers.

Don't see the answer you're looking for? Post your question

Can I install the towel warmer myself or do I need to hire someone to do it for me?

Each towel warmer comes with an instruction manual which fully explains how to install the device from start to finish. If you can hang a picture, you can probably install a heated towel rack. However, for hardwired models, you will need a licensed professional who is certified to do electrical wiring for the final hook-up. 

19 people found this helpful.  Did you find this helpful? Yes No

Can the electric towel warmer be installed “upside down” to change the power access point?

Yes, most of our wall-mounted towel warmers have a fixed power location in the lower right corner.  All of our heated towel racks are electric "dry" (liquid/oil-free) units and most can be installed "upside down". Doing so will result in the power location relocating from the lower right corner to the upper left corner.

Please see the installation video here:  https://www.warmlyyours.com/en-US/video-media/towel-warmer-install

17 people found this helpful.  Did you find this helpful? Yes No

How do I use the towel warmer after it is installed?

Our towel warmers are designed for everyday use and all of them include an integrated on/off switch. Please note that the Ibiza model includes additional built-in timer options for controlling the unit. WarmlyYours also offers a wide array of controls that can be used with your heated towel rack. Depending on the control you select, you can program the heated towel rack to your schedule or operate it remotely. Just bear in mind that the heated towel rack is designed to gradually warm towels over the course of a day and does work best when towels are left to hang for about 3 hours.

15 people found this helpful.  Did you find this helpful? Yes No

How hot does the towel warmer actually get and is there any possibility of damage?

The heated towel rack will heat up to between 100 and 140 degrees Fahrenheit. It will not produce sufficient heat to injure you if you touch or brush up against it, though you should still exercise caution around the device. Please note that once a heated towel rail is warmed up, the surface temperature will remain constant and can't be adjusted incrementally. 

The heated towel racks have a built-in offset from the wall (the size of the offset will depend on which model you purchased); the offset provides sufficient clearance to prevent any damage to the wall. You should also maintain a distance of four inches between the towel warmer and surrounding fixtures.

Additionally, nearly all of our electric towel warmer models* come with built-in TempSmart™ overheat protection which will shut the unit down automatically if the unit's surface exceeds the safety limit of between 149°F (65°C) and 167°F (75°C).

*Excludes the Elements model.


15 people found this helpful.  Did you find this helpful? Yes No

Does the towel warmer have an automatic shutoff function?

The heated towel rack is designed to stay on at a relatively constant temperature to keep your bathrobes and towels fresh, warm, and dry. However, should you need to turn the unit off for any reason, you can use the integrated on/off switch on the unit. If you’re using a control for your heated towel rack, you may need to shut off the unit there as well. 

Most of our electric towel warmer models* come with built-in TempSmart™ overheat protection which will shut the unit down automatically if the unit's surface exceeds the safety limit of between 149°F (65°C) and 167°F (75°C). 

*Excludes the Elements model. 

13 people found this helpful.  Did you find this helpful? Yes No

View all 32 Questions and Answers

Customer Reviews

Bellagio achieved an average rating of 5.0 stars with 3 reviews by our customers.

Have you used this product before? Leave a review

Warmly yours were great

Mike E., Fountain Valley, CA on 05/02/2024

I called to see about a problem I was having with my 15 year old towel warmer. I was told it’s probably time to replace it. Bad news was the price had gone up considerably more than 15 years ago, obviously, good news was because I was a previous purchaser I received 50% off the new one which was less than I paid for the first one. They sent it out pretty quickly considering it had to come from Canada. I installed it and it works great.

Awesome!

Robert P., Plainfield, IL on 02/16/2024

Package was delivered faster than usual. Installation was easy. The towel warmer works perfectly, after you set up the timer. Just like a bidet, it's a game changer and nice to dry off with a warm towel. I highly recommend this product and this business!

View all customer reviews