TempZone™ Cable Fixing Strips, 1’

Anonymous, Vancouver, WA on 06/09/2024

My first heated floor installation, thus endless questions and concerns. Sales and support staff were terrific in patiently answering my technical concerns and providing multiple different design layouts until I was finally ready to proceed. My tile installer was surprised by the wire, which was significantly more robust than the flimsy wire provided by other companies he had used. The WarmlyYours wire required much less wire to get the same heat output.

C/o S., St. Albert, AB on 12/10/2023

installed by a handy client with no issues and after 2 months of use the product is proving to be efficient and effective.

David H., Maple Ridge, BC on 10/29/2023

We installed heating cables in a kitchen, dining room, and hallway spanning around 1000 square feet. We didn't have complete layout information from your client, but you managed to complete the installation successfully with an additional roll of heating cable. It's great to hear that Jenn, the service representative, provided excellent technical support and offered a competitive price for the project. Well done!

Electrilight L., Oakville, ON on 04/16/2023

always been 100% confident with floor heating cables and thermostats, adding an extra floor thermocouple is paramount to ensure lifespan. Never had 1 recall or trouble from 10 years of installations. only con would be the towel warmer, even though it is high quality and strong, I found the mounting hardware a bit flimsy and unforgiving (not to mention the plastic wall plugs which provide no grip in drywall. Precisely measuring all mounting points, the unit ended up crooked (even though a lazer level was used for mounting positions. Diagonally measuring the mounting points was nearly 3/4" off AND the mounting feet have 0 forgiveness, and will leave marks on the finished paint on the walls. Shame there was not a larger mounting plate. The position of hexhead screws are 3/8 from wall and clumsy to tighten without more markings on finished paint. side note, it gets hot, too hot in my opinion

Response from WarmlyYours:

Dear Electrilight, we appreciate your feedback in regard to the range of our radiant heating products. Regarding the towel warmer, we are working with our supplier to improve how precisely the units are manufactured and strengthen the quality control process.

Electrilight L., Oakville, ON on 04/16/2023

not much to say about these, but 100% confident on orders

Elman B., Worcester, MA on 07/28/2022

The designer did not listen to my instructions. I told the salesman that the floor was highly insulated below the subfloor and that the vinyl covering had a temperature limit of 85 degrees. He specified your hottest possible arrangement for the floor size. (Three inch spacing with 3.7 watt wire and very narrow areas at the edge.) It should have had 4 or 5 inch spacing with your cooler 3.0 watt wire. ) I did not catch it until I had it for a while and was very bothered that it was too hot. Eventually I had to send it back and order a much shorter wire.

Response from WarmlyYours:

I'm sorry, we no longer stock the older-style 3 watt cable in a size that is required for your space. We apologize if there was a mixup in our discussions with you. We have historically had very good results with 3.7 watt cable spaced at 3" for enclosed porches. Enclosed porches are usually subjected to high amounts of heat loss, even if the floor is well insulated. It is better to have plenty of BTUs with some to spare than to not have enough. The thermostat that you purchased comes with a floor sensor. With the floor sensor installed in the floor, the thermostat can be set to limit the actual floor temperature to a specific temperature. This "Floor Limit" can be set to any temperature that you desire, or is required by the flooring manufacturer. The floor temperature will not exceed the value you enter, whether the wire is spaced at 3" or 4". We have found that 4" wire spacing works well in a second floor room with a heated room below, but may not have enough output for an enclosed porch. We rarely, if ever, quote 5" spacing because of "striping" of the heat which can result in cold spots in the floor. In the end, we always design a system that we believe will consistently deliver a great result. Thanks for your feedback, we appreciate it.

Anonymous, Mt Pleasant, IA on 06/02/2022

They verified my order before I ordered the products so i got what I needed. Speedy delivery as well

John W., Glendale, AZ on 12/29/2021

I had no experience installing electric radiant heating in a concrete slab, but with great advice and excellent install instructions I was able to install the cable, connect the thermostat and the system worked first time. The WarmlyYours team made it all possible by providing a drawing of where the heating cable is to be routed and all other installation instructions. Even when I made changes the WarmlyYours team quickly provided updated drawings and instructions. There is no better place to go for electric floor heating than WarmlyYours.

Stefanie, Orillia, ON on 12/06/2021

I love the floor heating from warmlyyours. It was easy to install, the thermostat is easy to handle and overall service from the sales team was excellent. Promptly responded when I had any questions. Lots of information was available over the internet. As well I liked the fact that a technical team send me an email asking me if I needed any help before I even started the project. Instruction how to install are clear and easy to read. I would have loved to give them a 5 star rating but can only give a 4 star as we were a little confused regarding the length of the cables we needed. The drawing and actual size did not match. But Troy and his team were eager and fast to fix the problem. We tried to figure out how much cable we need for each room but the instruction " how to figure it out was really difficult for myself and my contractor who deals mostly with Nuheat ( with them you get a cable/ squarefoot table to see how much you need. I know that it varies but it gives you a better idea ) My contractor loved the little gadget which was send with the order to check if the cable is properly connected. But I thought it was overkill to send me the same gadget for each room . One would have done it and we would have saved a little money and waste. We used an master electrician to connect the system to make sure everything is done in order. Overall I would highly recommend the product. So far so good it works like a charm and it seems to put out the heat we need to be toasty. Thanks WarmlyYours :)))))))))

Luc C., Quebec, QC on 10/03/2021

The complete drawing supplyed is complete and contained all information needed for the DIY installation that i made. The installation was easy and the material included in the kit fitted very well. This system was replacing another one and by instaling as per the recommandation the new system is more powerfull and heat-up more rapidely than the older one. They follow up after the installation, good service. Very good experience, i look forward to make another installation with this company